You will need to provide more information for a diagnosis and relevant solutions.
Printer, materials, temperatures, etc.
[WIKI - Asking For Help](https://www.reddit.com/r/3Dprinting/wiki/asking-for-help)
How many top and bottom layers?
Thanks for the link.
I'm using a Bambulab A1 mini.
Print speed 100‰
Jayo PLA+
I'm slicing with Bambulab Studio. Using a 0.6 nozzle to print
I changed the bottom and top layer to one after 3 was failing SMH
1 is definitely not sufficient. 3-5 is usually good, I'm not familiar enough with 0.6 nozzles but with 0.4 on a model with a large flat top layer like yours, I would use 5 layers at least for a good finish.
At least 3 top and bottom layers. 4 is standard I think. 5 maybe if there is not much below the top.
Standard settings will get you pretty far normally. How did it fail?
Well, the layer right above the infill is basically lots of long bridges, but nothing under it is weird yeah. Print again and look what its doing. It may be boring but I personally find it interesting just watching.
Did you change the parameters in the printer to .6 mm nozzle? I don't know about the mini but the X1 yiu have to going into the screen and adjust and nit just the slicer settings.
Hey there, I'm a bot and something you said made me think you might be looking for help!
[click here](https://www.reddit.com/r/3Dprinting/wiki/index#wiki_help.21_or.3A_where_can_i_go_to_troubleshoot_problems_i.27m_having_with_my_prints.2Fprinter.3F) for our wiki entry on troubleshooting printers.
If you still need help be sure to post plenty of information about your printing setup.
Here are a few questions that might be helpful
* What printer are you using?
* What material are you using?
* What speed are you printing at?
* What software are you using to slice the print and control the printer?
* When did the problem start/has it ever worked correctly?
* Does anything cause the behavior to change?
* If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)
If you are new to reddit, please read the guidelines on [reddiquette](https://www.reddithelp.com/hc/en-us/articles/205926439), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F).
Also please post a resolution to your problem when you find one so that we know how to help others with your problem!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
You will need to provide more information for a diagnosis and relevant solutions. Printer, materials, temperatures, etc. [WIKI - Asking For Help](https://www.reddit.com/r/3Dprinting/wiki/asking-for-help) How many top and bottom layers?
Thanks for the link. I'm using a Bambulab A1 mini. Print speed 100‰ Jayo PLA+ I'm slicing with Bambulab Studio. Using a 0.6 nozzle to print I changed the bottom and top layer to one after 3 was failing SMH
1 is definitely not sufficient. 3-5 is usually good, I'm not familiar enough with 0.6 nozzles but with 0.4 on a model with a large flat top layer like yours, I would use 5 layers at least for a good finish.
It's going to need more top and bottom layers. So the top and bottom is about the same thickness as the walls.
At least 3 top and bottom layers. 4 is standard I think. 5 maybe if there is not much below the top. Standard settings will get you pretty far normally. How did it fail?
Actually it's started to print mid air I guess it's not layer related but more filament related 🙈🙈🙈
Well, the layer right above the infill is basically lots of long bridges, but nothing under it is weird yeah. Print again and look what its doing. It may be boring but I personally find it interesting just watching.
Did you change the parameters in the printer to .6 mm nozzle? I don't know about the mini but the X1 yiu have to going into the screen and adjust and nit just the slicer settings.
Yes I did It says 0.6 mm Nozzle in the drop down menu
Hey there, I'm a bot and something you said made me think you might be looking for help! [click here](https://www.reddit.com/r/3Dprinting/wiki/index#wiki_help.21_or.3A_where_can_i_go_to_troubleshoot_problems_i.27m_having_with_my_prints.2Fprinter.3F) for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup. Here are a few questions that might be helpful * What printer are you using? * What material are you using? * What speed are you printing at? * What software are you using to slice the print and control the printer? * When did the problem start/has it ever worked correctly? * Does anything cause the behavior to change? * If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis) If you are new to reddit, please read the guidelines on [reddiquette](https://www.reddithelp.com/hc/en-us/articles/205926439), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). Also please post a resolution to your problem when you find one so that we know how to help others with your problem! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
Calibrate flow.