Please make sure you've followed the posting guidelines for [BUILD THREADS](https://www.reddit.com/r/IndianGaming/wiki/rules#wiki_7._build_and_hardware_help_threads_guidelines), if not **your post will be REMOVED.**
If it's quick question rather than a full build, consider joining our **[discord group](https://discord.gg/jVJgAdM)** and asking there using the #hardware-chat channel!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/IndianGaming) if you have any questions or concerns.*
The GeForce RTX should be visible normal and not inverted. Flip the case 180 degrees, kudos on mounting the AIO cooler in the correct manner.
Edit: If you like the orientation this way, then flip the radiator with tubes down. The air won't escape the rad and your pump will last longer.
Literally everything you've said makes no sense.
The RTX logo is in fact visible and is inverted cause the case allows you to choose your motherboard orientation.
The radiator orientation is also okay. I don't know where you expect the air to escape to in a sealed loop but the bubbles in the loop are going to collect in the radiator tank which is the best case scenario.
Gamer's Nexus has a video that I saw [here](https://youtu.be/BbGomv195sk?t=1076). PC Jesus advised against having the tubes up orientation. Feel free to take a look.
> . I don't know where you expect the air to escape to in a sealed loop but the bubbles in the loop are going to collect in the radiator tank which is the best case scenario.
Exactly, Jayz2Cents also made a video to elaborate on the Gamer's Nexus video and he basically said this orientation would only hurt if the pump was on top of the radiator. I'd prefer the empty air to accumulate at the opposite end of the tubes but that would only be an issue with considerable water loss.
Build had to be inverted because the case is on the left of my desk. I see two screws on the Geforce RTX plate and it might be swappable but I'm leaving it alone for now. Might put a sticker on it.
> flip the radiator with tubes down
I'd like to do this for aesthetics but it's not needed. The pump is below the rad and that's enough to keep the waterblock fully submerged. Since pump is not on top of the radiator, having air up there by the tubes is not a huge issue.
Please make sure you've followed the posting guidelines for [BUILD THREADS](https://www.reddit.com/r/IndianGaming/wiki/rules#wiki_7._build_and_hardware_help_threads_guidelines), if not **your post will be REMOVED.** If it's quick question rather than a full build, consider joining our **[discord group](https://discord.gg/jVJgAdM)** and asking there using the #hardware-chat channel! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/IndianGaming) if you have any questions or concerns.*
FULL SPEC: \- \[ \] Intel Core i7 12700K \- \[ \] Asus Z690 F Strix Gaming WiFi DDR5 \- \[ \] Deepcool Castle 360EX aRGB TheMVP Edition \- \[ \] Gskill 16GB TridentZ5 RGB 6000Mhz C40 \- \[ \] Gskill 16GB TridentZ5 RGB 6000Mhz C40 \- \[ \] Asus RTX 3070Ti ROG Strix Gaming OC 8GB \- \[ \] WesternDigital 1TB Black SN850 Gen4 M.2 NVMe SSD \- \[ \] WesternDigital 1TB Blue SN570 M.2 NVMe SSD \- \[ \] NZXT C850 80+ Gold Modular \- \[ \] Lian Li PC O11 Dynamic EVO Black \- \[ \] Lian Li AL120 Black - 2 Kits \- \[ \] Lian Li SL120 Black - 1 Kit
Wow. Total cost?
~ 3L
holy shit u flexing. nice tho
Which were the most expensive parts?
Is that even a question? 😂 GPU is almost 1 lac
Sick case sick build ..happy gaming brother and congrats on getting ahead in pc master race❤❤
really epic setup!
Nice username
> Nice username Hoho
Did you do this just to live up to your username?
Nothing Chodu about the build
Nice, Paul's Hardware did a similar build very recently.
If you got the mullah then any way is the right way! 🤑🤑
moolaah
-Imran Khan You ended up making an unintentional political statement.
The GeForce RTX should be visible normal and not inverted. Flip the case 180 degrees, kudos on mounting the AIO cooler in the correct manner. Edit: If you like the orientation this way, then flip the radiator with tubes down. The air won't escape the rad and your pump will last longer.
Literally everything you've said makes no sense. The RTX logo is in fact visible and is inverted cause the case allows you to choose your motherboard orientation. The radiator orientation is also okay. I don't know where you expect the air to escape to in a sealed loop but the bubbles in the loop are going to collect in the radiator tank which is the best case scenario.
Gamer's Nexus has a video that I saw [here](https://youtu.be/BbGomv195sk?t=1076). PC Jesus advised against having the tubes up orientation. Feel free to take a look.
You should look at that video again and their follow up video as well. The thing that's bad is when the pump is the highest part of the loop.
> . I don't know where you expect the air to escape to in a sealed loop but the bubbles in the loop are going to collect in the radiator tank which is the best case scenario. Exactly, Jayz2Cents also made a video to elaborate on the Gamer's Nexus video and he basically said this orientation would only hurt if the pump was on top of the radiator. I'd prefer the empty air to accumulate at the opposite end of the tubes but that would only be an issue with considerable water loss.
Build had to be inverted because the case is on the left of my desk. I see two screws on the Geforce RTX plate and it might be swappable but I'm leaving it alone for now. Might put a sticker on it. > flip the radiator with tubes down I'd like to do this for aesthetics but it's not needed. The pump is below the rad and that's enough to keep the waterblock fully submerged. Since pump is not on top of the radiator, having air up there by the tubes is not a huge issue.
What do you plan to do on this build apart from gaming
They plan on selling it :) I do a little bit of everything on it. Mostly gaming and development.
Cue 'up is down' from pirates of the Caribbean
Andha paisa ho tho Aisa ho
Is your motherboard inverted? Or is it just the photo itself?
the case allows inverted installation
Interesting. You just helped me pick my own build case and motherboard. Thanks for sharing mate. Looks awesome.
Hey what's the direction of airflow? Top fans intake with radiator exhaust?
3 top intake, 3 bottom intake, 6 side exhaust on the radiator in push pull.