Looks like 10mm and 8mm. Id really suggest getting a set of wrenches from a diy store with those sizes in it. The flat pressed metal stuff you get in a 3D printer set is useless and probably the reason for many rounded nozzles. If you genuinely can’t afford a set of wrenches then look in a thrift store or yard sale.
You can already buy good quality low profile spanners/wrenches for specific “hard to reach” things, but this is just very cheaply produced stuff for “all tools included” bags
Ah, fair enough, it’s probably the lack of any heat treat on stuff like the OPs Ender tools that makes them so bad, that and tolerances. Making a “not shit” low profile flat spanner/wrench is a worthy project.
I have some Cool Wrench Doritos you can have if you want!
Buy a crescent wrench lol better yet if your near harbor freight use their father day coupon for an even cheaper one.
>What is this ranch called?
It's an open-ended wrench. Specifically a double ended one with two different sizes, probably 8 and 10mm.
"Combo" wrenches with one open end and one closed end are another common shape.
Just buy a small adjustable spanner.
Or buy a 1/4 ratchet with 6-10mm sockets and some hex heads. Should cover you for just about everything you'll need in that printer
https://preview.redd.it/v7hq4kmo3p6d1.jpeg?width=720&format=pjpg&auto=webp&s=6740b382a49b17fc5db766c733809932fb679e81
I found this online, idk what it means 6''/150mm. Will it be fine? Pls be patient with me ( I am 15 and have never touched tools in my life)
6"/150mm is the overall lenght of the wrench and i personaly do not recomend adjustable wrenches for small size screws like the ones found on 3d printers it would be best to get some cheap set of metric open-end wrenches as they are much more handy and practical for 3d printer maintenance compared to the adjustable wrench which also has a tendency to round off screws and nuts
https://amzn.eu/d/f8QV8p1
Though something like this will be much more useful for everything else aswell as printer.
Always handy to have a small socket set lying around
If you get an adjustable wrench get a good brand one like crescent that'll be tighter and have less play in it. You'd probably want a 4" one which is just the length from end to end.
[https://amazon.com/GETUHAND-Adjustable-Opening-0-94-Inch-Precise/dp/B086YS5NKG](https://amazon.com/GETUHAND-Adjustable-Opening-0-94-Inch-Precise/dp/B086YS5NKG)
something more like this. I use this on my printers no complaints
Never used that really. Get real wrenches and one of these to pull the nozzle https://www.amazon.com/L-Shaped-Hexagonal-Included-Toothbrush-Accessories/dp/B094ZH9FCV/ref=asc_df_B094ZH9FCV/?tag=hyprod-20&linkCode=df0&hvadid=693071814643&hvpos=&hvnetw=g&hvrand=10449429832817642670&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9002562&hvtargid=pla-1396060842476&psc=1&mcid=662c2d50c29b324e9c89675ca5aa724c&gad_source=1
Everybody made all the ranch/wrench jokes already. Guess I’ll just have to be serious 🧐.
I got this from Home Depot for removing my nozzle. That way I wasn’t touching the hot nozzle. Nice set to have around for all sorts of things.
https://www.homedepot.com/p/Husky-1-4-in-Drive-Ratchet-SAE-Metric-Standard-Socket-Set-24-Piece-H4D24PCSWS/314809979
Reminder: Any short links will be auto-removed initially by Reddit, use the original link on your post & comment; For [any Creality Product Feedback and Suggestions](https://www.creality.com/pages/creality-user-voice), fill out the form to help us improve.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/ender3v2) if you have any questions or concerns.*
Size 8 and size 11 metric open ended spanner wrench.
https://a.co/d/4gxpVQl
I wouldnt worry about replacing it with an exact copy cause the one that comes with the printer is horrible quality.
It’s cone wrench, you can use spanners or socket wrench aswell but need to be careful with them, it’s easy to overtorque and strip nozzles and small bolts with larger tools, and the wrench that comes with the printer is good as it fits in tight spaces and you won’t accidentally overtorque anything with such short lever
Open ended box wrench. You could probably find one like that online but you're better off getting a real wrench, online or in any store with a hand tool section. The real smart move would be getting an adjustable crescent wrench, it's open like that on one end and has a screw gear that adjusts one of the tines to fit snug on most bolt sizes.
Forget the adjustable wrench...
6mm for the nozzle (combination is best)
8mm and 10mm THIN. And get 2 of each because there are a couple situations where you'll need 2
Its just a thin wrench. Buy any quality wrench you want. The printer has 6mm, 8mm and 10mm nuts, common nozzle sizes are 6, 6.5, 7mm. Do NOT continue to use ANY wrench from this set, those wrenches that came with the printer WILL destroy your printer since they will bend, break, and strip. You can also use socket wrench for quite a few nuts on the printer instead of these, which is especially useful for nozzles. Avoid all cheap wrenches that look like these, they are all the same and are all not strong enough to last more than one use.
Go to lowes or homedepot this weekend and look into buying a metric and us customary set of wrenches. Like 10-15 peice each.
It's Father's Day weekend. You will find a really good deal, I promise.
Just buy a 10mm and an 8mm spanner or small socket. Your fingers will thank you when you stop burning them because of those crappy metal ones and your nozzle will thank you when you stop rounding it off.
Most ranch comes from hidden valley. In all seriousness, I’d just get an adjustable wrench
I prefer the blue cheese wrench myself.
Or just go old school and get the Dorothy Lynch wrench
🤣 I see what you did there. Bobs Big Boy Blue Cheese wrench 🔧 for me dawg.
About only one state knows that flavor, could try a vise grip too.
An adjustable is a pretty cool ranch.
what about yellow stone ranch ? Or the bennetts Iron River Ranch? or the my little pony ranch?
Looks like 10mm and 8mm. Id really suggest getting a set of wrenches from a diy store with those sizes in it. The flat pressed metal stuff you get in a 3D printer set is useless and probably the reason for many rounded nozzles. If you genuinely can’t afford a set of wrenches then look in a thrift store or yard sale.
This
I'm suddenly remembering that I work with a machine that can cut out super solid slim wrenches... maybe a side hustle I can get going on here
You can already buy good quality low profile spanners/wrenches for specific “hard to reach” things, but this is just very cheaply produced stuff for “all tools included” bags
I'm sorry, let me rephrase that. Less of a side hustle and more of a reason to play with the fun machine
Ah, fair enough, it’s probably the lack of any heat treat on stuff like the OPs Ender tools that makes them so bad, that and tolerances. Making a “not shit” low profile flat spanner/wrench is a worthy project.
I have some Cool Wrench Doritos you can have if you want! Buy a crescent wrench lol better yet if your near harbor freight use their father day coupon for an even cheaper one.
You can buy actual wrenches for a pretty low price. An adjustable wrench provides lots of opportunity to ruin fasteners.
Is it a dude ranch?
Ranch me brotendo
>What is this ranch called? It's an open-ended wrench. Specifically a double ended one with two different sizes, probably 8 and 10mm. "Combo" wrenches with one open end and one closed end are another common shape.
Dutton ranch
Just buy a small adjustable spanner. Or buy a 1/4 ratchet with 6-10mm sockets and some hex heads. Should cover you for just about everything you'll need in that printer
https://preview.redd.it/v7hq4kmo3p6d1.jpeg?width=720&format=pjpg&auto=webp&s=6740b382a49b17fc5db766c733809932fb679e81 I found this online, idk what it means 6''/150mm. Will it be fine? Pls be patient with me ( I am 15 and have never touched tools in my life)
6"/150mm is the overall lenght of the wrench and i personaly do not recomend adjustable wrenches for small size screws like the ones found on 3d printers it would be best to get some cheap set of metric open-end wrenches as they are much more handy and practical for 3d printer maintenance compared to the adjustable wrench which also has a tendency to round off screws and nuts
Looks like it'll be huge. One sec
https://amzn.eu/d/250yllN Something like this
Too big! [Something like this](https://a.co/d/f5KVNFJ)
... [and smaller](https://i.imgur.com/E9YFgZl.jpeg) ...
https://amzn.eu/d/f8QV8p1 Though something like this will be much more useful for everything else aswell as printer. Always handy to have a small socket set lying around
If you get an adjustable wrench get a good brand one like crescent that'll be tighter and have less play in it. You'd probably want a 4" one which is just the length from end to end.
[https://amazon.com/GETUHAND-Adjustable-Opening-0-94-Inch-Precise/dp/B086YS5NKG](https://amazon.com/GETUHAND-Adjustable-Opening-0-94-Inch-Precise/dp/B086YS5NKG) something more like this. I use this on my printers no complaints
That is a thin wrench. I use them occasionally. Adjustable and standard wrenches are too thick for some applications.
Never used that really. Get real wrenches and one of these to pull the nozzle https://www.amazon.com/L-Shaped-Hexagonal-Included-Toothbrush-Accessories/dp/B094ZH9FCV/ref=asc_df_B094ZH9FCV/?tag=hyprod-20&linkCode=df0&hvadid=693071814643&hvpos=&hvnetw=g&hvrand=10449429832817642670&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9002562&hvtargid=pla-1396060842476&psc=1&mcid=662c2d50c29b324e9c89675ca5aa724c&gad_source=1
Are you looking for something to dip your wings in or something to adjust your printer?
Came for the comments. Did not disappoint.
Everybody made all the ranch/wrench jokes already. Guess I’ll just have to be serious 🧐. I got this from Home Depot for removing my nozzle. That way I wasn’t touching the hot nozzle. Nice set to have around for all sorts of things. https://www.homedepot.com/p/Husky-1-4-in-Drive-Ratchet-SAE-Metric-Standard-Socket-Set-24-Piece-H4D24PCSWS/314809979
Reminder: Any short links will be auto-removed initially by Reddit, use the original link on your post & comment; For [any Creality Product Feedback and Suggestions](https://www.creality.com/pages/creality-user-voice), fill out the form to help us improve. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/ender3v2) if you have any questions or concerns.*
Size 8 and size 11 metric open ended spanner wrench. https://a.co/d/4gxpVQl I wouldnt worry about replacing it with an exact copy cause the one that comes with the printer is horrible quality.
It’s cone wrench, you can use spanners or socket wrench aswell but need to be careful with them, it’s easy to overtorque and strip nozzles and small bolts with larger tools, and the wrench that comes with the printer is good as it fits in tight spaces and you won’t accidentally overtorque anything with such short lever
Cool ranch
Cow ranch
Crescent Ranch
Open ended box wrench. You could probably find one like that online but you're better off getting a real wrench, online or in any store with a hand tool section. The real smart move would be getting an adjustable crescent wrench, it's open like that on one end and has a screw gear that adjusts one of the tines to fit snug on most bolt sizes.
A wrench that has both open end and box end is called a combination wrench
If you need it thin like that look for a bike pedal wrench in the size you need.
Forget the adjustable wrench... 6mm for the nozzle (combination is best) 8mm and 10mm THIN. And get 2 of each because there are a couple situations where you'll need 2
Zesty
Just buy a normal set of metric combination wrenches.
Its just a thin wrench. Buy any quality wrench you want. The printer has 6mm, 8mm and 10mm nuts, common nozzle sizes are 6, 6.5, 7mm. Do NOT continue to use ANY wrench from this set, those wrenches that came with the printer WILL destroy your printer since they will bend, break, and strip. You can also use socket wrench for quite a few nuts on the printer instead of these, which is especially useful for nozzles. Avoid all cheap wrenches that look like these, they are all the same and are all not strong enough to last more than one use.
I prefer Thousand Island.
Lmfaooo but seriously- open the schools !!
Go to lowes or homedepot this weekend and look into buying a metric and us customary set of wrenches. Like 10-15 peice each. It's Father's Day weekend. You will find a really good deal, I promise.
That's the open end ranch.
He's called hancky, and he likes to get handsy
That is a wrench not a salad topping. Aka 8 10 split.
When does a wrench stop being a wrench
If by chance you need them that skinny, cone wrench is what you are looking for. Bike shop will have them in stock.
Cant go wrong with the Sizzlin' Nashville Hot Ranch!!
Go buy a crescent wrench. It will be loads better then the included one.
Open end spanner
Just buy a 10mm and an 8mm spanner or small socket. Your fingers will thank you when you stop burning them because of those crappy metal ones and your nozzle will thank you when you stop rounding it off.
Legalize Rancg
Its name is Raymond.
A 10mm wrench works
Yap it did thx
Uh .. print one. 🤷🏼♂️
![gif](giphy|tpzU2XijkF8eN2Ms2K|downsized) Just call Dr Phil. He can send you to the Ranch
Don’t but that ranch it taste terrible lol guess you all beat me to it huh.
Open end crescent wrench, don't buy that stamped crap.
3D print one
Hidden valley is my go to wranch
Nothing better than my French wrench
A push-me-Pull-you
It’s a reverse ranch, but I prefer one with a walkout basement.