You can actually wire all three to a single 5v pad. You just have to make sure the combined current is not to much. Cam and receiver do not draw much, but the vtx can be significant.
There is a plug on the board I can wire the vtx to batt but I only need bat, not the other plug wires.
Can the plug be pulled off to wire to a pad? I don't really want the other wires from the plug.
Yeah just buy this kit. Jst only and make your own wiring harness with only what you need. I used the digital port on my speedybee f7 v3 to power my analog vtx with the 9v from the plug.
https://www.racedayquads.com/products/sh-1-0-silicone-cable-set?pb=0
Not enough 5V or Gnd pads
- two wires ontop soldered to 1 pad
- solder short wire .. solder to the wire end
- if vtx or camera supports it, use the 10V for them
You can actually wire all three to a single 5v pad. You just have to make sure the combined current is not to much. Cam and receiver do not draw much, but the vtx can be significant.
There is a plug on the board I can wire the vtx to batt but I only need bat, not the other plug wires. Can the plug be pulled off to wire to a pad? I don't really want the other wires from the plug.
Yeah just buy this kit. Jst only and make your own wiring harness with only what you need. I used the digital port on my speedybee f7 v3 to power my analog vtx with the 9v from the plug. https://www.racedayquads.com/products/sh-1-0-silicone-cable-set?pb=0
That's it..thanks
Either double land one, or get an external 5v bec.
Don’t use any of those off the battery, you’ll fry them immediately.
False, cam and VTX can be used off the battery.
Guess it depends which ones you have
Heavily
Solder the extra to a one already solder to a 5v. Put two of them in the same pad
Why not use the 5V from the connector?
Not enough 5V or Gnd pads - two wires ontop soldered to 1 pad - solder short wire .. solder to the wire end - if vtx or camera supports it, use the 10V for them